XTRM BLAST Plastic Abrasive Media
Accelerate coating removal. Reduce substrate abrasion.
45-48 lbs./cu. ft.
MAX OPERATING TEMP (deg. F)
200 degrees F
NOTE: Product specifications are minimum values. Actual results may be higher.
1. 10/14 Mesh 0.14 - 2.0 mm
2. 10/16 Mesh 0.12 - 2.0 mm
3. 10/35 Mesh 0.50 - 2.0 mm
4. 12/20 Mesh 0.85 - 1.68 mm
5. 14/20 Mesh 0.85 - 1.4 mm
6. 16/20 Mesh 0.85 - 1.2 mm
7. 20/30 Mesh 0.56 - 0.85 mm
8. 30/40 Mesh 0.42 - 0.56 mm
9. 30/50 Mesh 0.29 - 0.56 mm
10. 40/60 Mesh 0.25 - 0.42 mm
11. 60/80 Mesh 0.16 - 0.25 mm
12. 60/100 Mesh 0.15 - 0.25 mm
All material can be packaged in 50 lb. drums, 100 lb. drums, 250 lb. drums, 1500 lb. supersacks and 1500 lb. gaylord boxes.
XTRM BLAST ACRYLIC MEDIA
This clear and smoked acrylic media is a very gentle, soft plastic abrasive used for ultra-sensitive surfaces while providing an effective strip rate.
XTRM BLAST™ is a plastic abrasive blasting media designed for fast coating removal, reduced substrate abrasion and ultra-reusability. It combines durability, minimal harshness and speed for an economical alternative to chemical stripping and sanding of engineered composite products, aluminum and fiberglass.
The durability of this product offers lower media consumption and less dust when blasting. This non-hazardous material is available in Mil-Spec grade and XTRM BLAST Premium grade meeting or exceeding MIL-P-85891 (A). It is specifically designed to remove coatings from most sheet composite, fiberglass, aluminum, and to demur plastics, metals and ceramics
No toxic chemicals/vapors
Lower consumable costs with recyclable media
Faster and safer than chemicals or sanding
Retains clad, galvanized, anodized and phosphate coats
Provides superior surface or adhesion of paint
Major reduction in manpower requirements
Eliminates metal embrittlement
Reduced energy consumption
For more information on XTRM BLAST™, call us at 908-558-0011 or email us at email@example.com.